TECHNICAL SPECIFICATIONS OF DLP PROJECTOR

 

Features

Specification

DISPLAY TECHNOLOGY

DLP

RESOLUTION

1024 x 768 (Total 786,432 pixels), 600 Video Lines

BRIGHTNESS

3000-3500 ANSI lumens

CONTRAST RATIO

2500 : 1

ZOOM/FOCUS

Auto Focus & Zoom Lens

OFF SET AXIS

8 : -1 up (Digital lens shift)

PICTURE SIZE

40-300 inches diagonal

WALL COLOR CONTROL

Beige, Blue, Green, Pink, Blackboard

Colour Wheel

5 Segment Colour wheel

SOURCE LAMP

High pressure mercury lamp 300W; 5000 Hrs Lamp Life

PC COMPATIBILITY

Resolution: 640 x 480 - 1024 x 768 + Compressed 1280 x 1024

VIDEO COMPATIBILITY

NTSC/NTSC 4.43/PAL (including PAL-M, N) /SECAM/PAL-60, Component Video; 480i/p (525i/p), 576i/p (625i/p), 720p (750p 50/60Hz), 1080i (1125i 60Hz), 1080i (1125i 50Hz), 1080i (1250i 50Hz)

INPUT TERMINALS

RGB: Mini D-sub 15pin x 2, DVI-D (with HDCP) x 1

Audio: Stereo Mini Jack (ψ 3.5mm) x 1

Video: RCA x 1 + S-VIDEO x 1

Audio: RCA (LR) x 2

OUTPUT TERMINAL

RGB: Mini D-sub 15pin x 1

 

Audio: Stereo mini jack (ψ 3.5mm) x 1 DC OUT (5V)

COMMUNICATION TERMINAL

RS-232C; 8pin x 1  Mouse; USB x 1

SCANNING RATE

[H] 15 - 100 kHz, [V] 50 - 95 Hz, [Dot Clock] max 140 MHz

AUDIO SPEAKER

2 W Mono

HEIGHT ADJUSTER

One-Push Rear leg (-1 to 7 degree variable)

HAND REMOTE UNIT

• Projector fully control, • USB Mouse Cursor Control (w/ page up/down & home/end, • High brightness Laser pointer (w/ cancelable mode), • High image quality PinP

POWER CONSUMPTION

Max. 350W

POWER REQUIREMENTS

AC 100-240V, 50/60 Hz

WIRLESS ADAPTER

Network Standards

IEEE 802.11 a/b/g, Ethernet

Processor

Sigma Design 8622 processor consisting of MPEG-1/2/4 decoder, 166MHz ARM 7 processor and an XGA-above graphic capability

Flash

8 MB

Other Chipset

Atheros a/b/g WLAN mini-PCI card

WLAN Access

Ad-hoc mode / Infrastructure mode

Transmission Rate *

802.11a/g: Up to 54Mbps

Management Protocol

Web-based utility

Graphics Resolution

800x600,1024x768/1280x1024

Color Depth

16/24/32 bit

Security Mechanism

64/128 bit WEP

MPEG Support

MPEG-1, MPEG-2, WMV9, MPEG-4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Brooder Cages for Chicks:

 

 

      Total No of Tiers: 5,

      Total No of Cages in Each Tier: 2 Nos.

      Rack Size: 6Ft X 5Ft X 30",

      Cage Size: 30" X 12" X 30” fitted complete along with lighting arrangement in every cage.   

      Temperature controlled through thermostat.

      Rack to be provided with four swivel castor wheels of long lasting made of high grade Nylon Material with Brakes in Two Wheels.

      Supply with cord & plug to work on 220/230 Volts Ac Supply.

      The racks and cages should be made of highly polished, non-magnetic stainless-steel. If other material is used it must have anti-rust properties with Warranty for at least 24 Months.

 

Poultry adult cages

 

·        Made of heavy duty mild-steel duly epoxy-coated, with excreta pan, boom floor net, food hopper and water bottle. Size: (L)30 “ x (W)24 “ x (H)18 “

 

Poultry chick cages

 

·        Made of heavy duty mild-steel duly epoxy-coated, with excreta pan, boom floor net, food hopper and water bottle. Size:  (L)24 “ x (W)18 “ x (H)18 “

 

 

Mice stock cage

 

·        Body : Unbreakable, autoclavable, 4-5 mm thick  polypropylene body,       650 x 500 x 200 mm

·        SS top Grill : mesh size- 25 x 5 mm x 14 swg welded on a frame of heavy duty S.S. rod

·        provision for fixing 2 water bottle

·        provision for keeping feed pallets

·        two hooks for fixing top grill on the body of the cage

·        Water Bottle : autoclavable polypropyelene water bottle of capacity 500 ml with screw type cap fitted with neoprene rubber washer, SS nozel and SS ball.

 

 

 

 

 

 

 

 

 

 

 

 

Mouse cage

 

·        Body : Unbreakable, autoclavable, 4mm thick  polypropylene / polycarbonate  body,   290 x 220 x 140 mm

·        SS top Grill : mesh size- 25 x 5 mm x 14 swg welded on a frame of heavy duty S.S. rod

·        provision for fixing 2 water bottle

·        provision for keeping feed pallets

·        two hooks for fixing top grill on the body of the cage

·        Water Bottle : autoclavable polypropyelene water bottle of capacity 150 ml with screw type cap fitted with neoprene rubber washer, SS nozel and SS ball.

 

 

 

 

Guinea Pig Cage

 

·        Body : Unbreakable, autoclavable, 4-5 mm thick  polypropylene / polycarbonate / SS body,             650 x 5000 x 270 mm

·        SS top Grill : mesh size- 55 x 9 mm x 13 swg welded on a frame of heavy duty S.S. rod

·        provision for fixing 2 water bottle

·        provision for keeping feed pallets

·        two hooks for fixing top grill on the body of the cage

·        Water Bottle : autoclavable polypropyelene water bottle of capacity 500 ml with screw type cap fitted with neoprene rubber washer, SS nozel and SS ball.

 

 Guinea Pig Pan

 

 

 

 

 

 

 

 Steel Rabbit cage

 

 

 

Stainless Steel Racks to hold Animal Cages of various sizes

 

 

Brooder Cages for Chicks               30 x 12 x 30 mm

Mice stock cage                               650 x 500 x 200 mm

Mouse cage                                       290 x 220 x 140 mm

Guinea Pig Cage-                        650 x 5000 x 270 mm

 Steel Rabbit cage -                          450 x 600 x 450 mm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Laminar Air Flow

 

            Vertical / Horizontal type

Dimension  inner

                   outer

1500x600x650 mm

1650x805x1920 mm / 1650x905x1900mm

Air volume (Approx)

1700 m3/h               

Controller

Microprocessor LCD Display Controller, 9 stage velocity, total using time UV/FL Lamp On/Off

HEPA Filter

0.3  μ Particle  Removal 99.97%

Prefilter

3-30μm Particle  Removal , Recyclable

Purity

Class 100

Wind Velocity

0.35-0.50 m/sec

Lamp

UV Lamp 40wx2EA, FL lamp 40wx2EA

Material     Inner

                  Outer

Stainless Steel

Powder coated Steel

Door

Tempered Safety glass sliding Door

Utility Device

Air Cock, Gas Cock, 110/220 Consent

Electric Supply

110 V, 60 Hz  or 220 V, 50/60 Hz


Ultrasonicator

 

 

o       Avg.  power output            -            400 watts

o       Peak power output            -            800 watts

o       Frequency                   -            20 KHz, auto tuning

o       Convertor            -            standard probe 1.5 “dia (13mm) probelem                                                          with  threaded end and replaceable tip, volume                                                  – 10-250 ml

o       Input supply            -            230 V AC 50 Hz

o       Timer                           -           0-99.99 (min./Sec) electronic timer

o       Stand                           -           16mm dia SS probe tip

o       Base                             -           steel base

o       Should be provided with  audio-insulated chamber

o       Additional phy            -            titanium make: 3mm dia x 100 mm L and & mm dia x 100 mm L. for sample volume 5-200 and 20 – 500 ml respectively

o       Should have auto tuning and frequency control

o       Microprocessor based, programmable

o       Automatic amplitude compensation – 20% to 100 % pulse

o       Protection against dry run.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Gradient Thermocycler with Adjustable Heating Lid

 

 

 


  

 

Vertical Electrophoresis and Power Supply

 

 

The electrophoresis unit should accommodate to run four slabs gels of minimum size 8cm x 7 cm with 0.75 mm or 1 mm thickness simultaneously, spacers to be fused with glass plates, buffer volume in upper and lower tanks should not be more than 700-1000 ml. The basic unit should have a provision of accommodating other modules to perform blotting, two dimension electrophoresis, and tube gel electrophoresis and electro elution. The electrophoresis unit should take a load of 20 x 45 micro liter samples.

 

            The unit should be complete and supplied with basic unit, gel casting unit for casting four gels simultaneously, combs, glass plates with bonded spacers, sample loading guide. Modular unit to take up blotting.

 

 

 


 

Gel Documentation System

 

 

 

 

 

 


 

Submarine Electrophoresis System (DNA Electrophoresis System)

 

 

 

Power supply for submarine electrophoresis

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Refrigerated Microcentrifuge

 

 

 


Spectrophotometer

 

 

 

 

 

 

 

 

 

 

 

 

 

 


ICE FLAKING MACHINE

 

 

Specifications

 

 


Circulating Waterbath

 

 

 

 

 


Laboratory Freeze Dryer

The freeze dryer is required for freeze drying of viral/bacterial vaccine and sera.

Vacuum pump oil and vacuum pump flushing fluid.

 

 

SPECIFICATION FOR FABRICATION OF COLD ROOM

§         Location                                  : NIAH, Baghpat

·                                THK    PCGI outside

§         Room temperature                 : 0 Deg. C

 

TECHNICAL SPECIFICATION

PUF Panels

Type          :      Prefabricated Modular Panel

Insulation                  :                 PUF

Density                             :        40+ 2 Kg/m3

Locking                             :        Cam Lock

Internal Finish                    :        SS

External Finish                    :        PCGI

Floor Finish                       :        Prefabricated RPUF panel 80 mm thk 0.6 mm thk plain and Marine plywood  along with AL. chequred  sheet on top

Fire Resistance          :         Self extinguishing  as per ASTM 1692

Hygienic                          :        as per BS 2502

Accessories

Electronic temperature controller, Light switch, Door closer, Junction box, Safety alarm,

Suitable REF System                        : Capacity  18000 Btu/Hr.